An insulated box is a commonly used device used to maintain the temperature of its contents, whether refrigerated or warm. These boxes are usually used in picnics, camping, transporting food and medicine, etc. Here are some ways to use an incubator effectively:
- Refrigerated items: The insulated box can be pre-cooled before use. The method is to put a few ice cubes or freezer packs into the box a few hours before use, or place the insulated box in a refrigerated environment to pre-cool.
- Insulation items: If used for heat preservation, the insulated box can be preheated. You can fill a thermos with hot water, pour it into the incubator to preheat for a few minutes, then pour out the hot water and put in hot food.
- Seal well: Make sure all items placed in the incubator are properly sealed, especially liquids, to prevent leakage and contamination of other items.
- Reasonable placement: Place cold sources (such as ice packs or frozen capsules) dispersedly to ensure even distribution of cold sources. For hot food, use a thermos or other insulated container to further keep it warm.
- Each time the incubator is opened, the internal temperature control is affected. Minimize the number of openings and opening time, and quickly take out the needed items.
- Choose the appropriate size of the incubator based on the amount of items you need to carry. An insulating box that is too large may cause uneven distribution of cold and heat sources, affecting the insulation effect.
- Filling the gaps inside the insulated box with newspapers, towels or special insulation materials can help maintain a stable temperature inside the box.
- After use, clean the incubator promptly and keep it dry to prevent mildew and odor. Keep the lid of the incubator slightly open during storage to avoid odor problems caused by a closed environment.
Through the above methods, the effectiveness of the incubator can be maximized, ensuring that food or other items are at the ideal temperature whether during outdoor activities or daily use.
Configuration table of 25 Insulated Box (+ 5℃)
| Configure the name | configuring | Adaptation area |
| High temperature configuration | The lowest temperature of origin and the lowest temperature of destination were both 4℃ | nationwide |
| Low temperature configuration | The highest temperature of the origin and the destination are <4℃ | nationwide |
2 # Insulated Box (+ 5℃) assembly
| name | specifications /mm | quantity | graphic | |
| 2 # Insulator box | efficient loading | 630×350×500 | 1 |  |
| Box inner diameter | 720×420×570 | |||
| Box body outer diameter | 820×540×690 | |||
| The overall packaging | 840×560×710 | |||
| 2-B(+5℃) | 550×340×25 | 4 |  |
|
| 2-A(+5℃) | 400×340×25 | 4 |  |
|
| 2-C(+5℃) | 550×400×25 | 2 |  |
|
2 # Insulated Box (+ 5℃) use instructions —— high temperature configuration
| High-temperature configuration | operate |
 |
1, the ice box pretreatment42-B (+ 5℃), 42-A (+ 5℃) and 22-C (+ 5℃) ice cartridge in the-20℃ environment for at least 72 hours to ensure that the ice cartridge is fully frozen;
Ice box release cold After freezing, the ice box needs a certain time of paving and cooling pretreatment before use, and the relationship between the cooling time and ambient temperature is as follows (if the freezer of 1~4 degrees or cold storage ice box is used, it is no need to release and directly packing):
3. Loading As left picture: in 2~8℃ environment, put 22-A (+ 5℃) ice box side by side in the bottom of 2 # insulation box, then place the product box on the ice box, in and after 22-B (+ 5℃) ice box, 12-C (+ 5℃), then place 22-A (+ 5℃) ice box on the top of the product box, cover the box, sealed outsourcing, for shipment. |
2 # Insulated Box (+ 5℃) use instructions —— low temperature configuration
| Low-temperature configuration | operate |
 |
1, the ice box pretreatmentPretreat 42-B (+ 5℃), 42-A (+ 5℃) and 22-C (+ 5℃) ice boxes in 2~8℃ environment for at least 48 hours to ensure that the ice box is not frozen (all liquid);
Ice box release cold Refrigerated ice boxes are all in liquid state without cooling 3. Loading As shown in the left picture: in 2~8℃ environment, put 22-A (+ 5℃) refrigerated ice boxes side by side in the bottom of the 2 # insulation box, and then place the product box on the ice box, 22-B (+ 5℃) refrigerated ice boxes before and after the product box, 12-C (+ 5℃) on the left and right, and then place 22-A (+ 5℃) refrigerated ice boxes on the top of the product box, cover the box, seal outsourcing for shipment. |
Attached 1:2 # Insulated Box (+ 5℃) use instructions —— ice box pretreatment instructions
| Ice box is frozen and chilledPreprocessing instructions | Ice box cold storage | Handle the ice box in the-20 ± 2℃ freezer for more than 72h to ensure complete freezing. |
| Ice box release cold | After freezing, the ice box needs a certain time of cooling pretreatment before use, and the relationship between the cooling time and the ambient temperature is as follows: 2~8℃, 120~75 minutes【#】; 9~20℃, 75~35 minutes; 21~30℃, 35~15 minutes. Specific cooling time depends on the actual situation, different cooling environment will have a little difference.[#] explain:
1. The frozen ice box can also be cooled in the 2~8℃ freezer environment, the frozen ice is placed in the basket (the loading rate of ice is about 60%), the basket is stacked on the tray, the basket is stacked not exceeding 5 layers, in the 2~8℃ freezer for 48h in 2~3℃, the ice can be stored for 8 hours in the 2~8℃ within 8 hours; if it cannot be used, please freeze again and release. 2. The standardized pretreatment scheme formed by the above operation shall be formed into a standardized operation manual after the corresponding verification and confirmation with the cooperation of the customer. |
|
| Ice box status | 1, the ice box should be solid or a little liquid and solid mixed state before use, if more liquid or pure liquid can not be used;2, in the process of cooling to track the ice box surface temperature test (the purpose is to prevent excessive cooling), tracking interval time for 10 minutes, tracking test temperature operation method: take two pieces of chilled ice, two pieces of ice, the two parts of ice middle, wait for 3~5 minutes, to the thermometer temperature gentle reading temperature, confirm the current temperature will fold the frozen ice separate continue to release;
3. When the surface temperature of the ice box reaches 2~3.5℃, it can be pushed into 2~8℃ cold storage and packaged. |
|
| remarks | The ice box can be used for 2~8℃. If there is a large amount of liquid in the ice box, it should be returned to the frozen environment for pretreatment. | |
| Ice box cold storagePreprocessing instructions | Ice box cold storage | Treat the ice box in 2~8℃ refrigeration environment for more than 48h; ensure that the cooling agent in the ice box does not freeze and is in liquid state; |
| Ice box status | 1. The ice box should be liquid before use, and it should not be used if it is frozen;2. Stack the two ice boxes and measure the middle temperature of the two ice boxes, the temperature must be between 4 and 8℃; | |
| remarks | If it is not used in time, freezing phenomenon occurs in 2~8℃ refrigeration environment, it should be thawed at room temperature (10~30℃) as liquid, and then return to 2~8℃ refrigeration environment for pre-cooling; |
Post time: Jun-27-2024